Over 10,000+ customers' choice, Focus on screening industry 40+ years

Gentle Screening of Pharmaceutical Excipients with a Rotary Vibratory Sieve to Help Reduce Powder Breakage

Gentle Screening of Pharmaceutical Excipients with a Rotary Vibratory Sieve to Help Reduce Powder Breakage

1. Why Can Pharmaceutical Excipients Break During Screening?

Pharmaceutical excipients have different physical properties. Some granules have relatively high mechanical strength, while others are more fragile and may generate fines or fragments when subjected to impact, friction or repeated compression.

Several factors deserve attention during screening.

Vibration and Material Movement

Vibration causes materials to move across the screen surface. If the operating parameters are not suitable for the material, particles may experience more frequent collisions and friction, potentially increasing the risk of breakage.

Feeding Impact and Localized Material Accumulation

When materials enter the sieve from an excessive drop height or are fed unevenly, localized impact and accumulation may occur. This can expose some particles to greater mechanical stress.

Contact Between Particles and the Screen Mesh

As particles travel across the screen surface, they come into contact with the mesh and with one another. For fragile excipients, mesh specifications, screen surface conditions and material movement paths may all influence particle integrity.

Additional Mechanical Impact from Repeated Screening

If the selected mesh is unsuitable, materials may need to pass through the screening process repeatedly or follow an unnecessarily long screening route. This can increase the number of mechanical interactions experienced by the particles.

For pharmaceutical excipients that are prone to breakage or powdering, screening equipment selection should therefore consider not only classification capacity but also the compatibility between operating parameters and material properties.

2. How Can a Rotary Vibratory Sieve Help Reduce the Risk of Particle Breakage?

Gaofu Machinery's Rotary Vibratory Sieve uses a vertical vibration motor as its excitation source. Upper and lower eccentric weights generate combined vibration forces, producing horizontal, vertical and inclined movement of the screen body.

After entering the screen surface, materials gradually disperse, move and stratify under vibration. Particles that meet the selected mesh aperture pass through the screen, while the remaining material travels along the screen surface toward the corresponding discharge outlet.

For fragile pharmaceutical excipients, the equipment can be configured with attention to several key factors.

1. Adjustable Vibration Parameters to Match Material Properties

The angles of the upper and lower eccentric weights can be adjusted according to screening requirements, changing the movement trajectory of the material across the screen surface. For fragile particles, material trials can help identify suitable vibration settings and avoid operating conditions that may cause unnecessary mechanical impact.

2. Appropriate Mesh Selection to Reduce Repeated Screening

Selecting a suitable screen mesh according to the original particle size distribution and target particle size helps create a more appropriate screening process. This may reduce repeated processing caused by unsuitable mesh selection.

3. Optimized Feeding to Minimize Localized Impact

Proper planning of the feed position, drop height and feeding rate helps distribute materials more evenly across the screen surface. This can reduce localized accumulation and unnecessary impact during feeding.

4. Multi-Deck Screening for Different Particle Size Fractions

For pharmaceutical excipients that require separation into multiple particle size ranges, the machine can be configured with multiple screen decks according to process requirements. This allows several classification stages to be carried out within one machine and may reduce the need for repeated screening operations. The actual configuration should be confirmed through material testing.

3. Protecting Particle Integrity Through Proper Equipment Selection and Operation

Reducing screening losses in pharmaceutical excipient processing depends on more than the equipment structure alone. Equipment configuration, operating practices and routine maintenance all contribute to the overall screening process.

During equipment selection, manufacturers should pay particular attention to the following factors:

  • Understand material brittleness: Provide information about the excipient's particle shape, mechanical strength and tendency to generate fines to support equipment evaluation.

  • Define target particle sizes: Specify the oversized particles, fines or target particle size range that need to be separated according to downstream process requirements.

  • Match the required throughput: Avoid feeding rates that exceed the effective screening capacity, which may cause material accumulation on the screen.

  • Conduct material trials: Compare particle size distribution and fines content before and after screening to evaluate whether the selected equipment parameters are suitable.

During production, screen tension, mesh integrity and equipment operating conditions should be inspected regularly. If damaged mesh, abnormal vibration or noticeable powdering is observed, the cause should be investigated promptly to help prevent further effects on screening quality.

For pharmaceutical excipients that are moisture-sensitive or prone to agglomeration, manufacturers should also monitor production and storage conditions. Changes in material condition may create additional challenges during screening.

4. Aligning Screening Operations with Pharmaceutical Manufacturing Requirements

Pharmaceutical excipient screening is generally part of the raw material preparation stage. After screening, the material may proceed to blending, granulation, tablet compression or other downstream operations. Equipment configuration should therefore consider not only particle breakage but also material collection, transfer, cleaning and maintenance.

Gaofu Machinery's Rotary Vibratory Sieve can be configured with suitable feeding and discharge structures according to the production line layout. Receiving hoppers, conveying equipment and other auxiliary systems can also be evaluated as part of an integrated solution.

For applications where manual material handling needs to be reduced, connection to a Vacuum Conveyor can be considered according to the actual process requirements, helping improve material transfer between screening and downstream operations.

In multi-product pharmaceutical manufacturing, cleaning and inspection of product-contact components are equally important. Screen meshes, frames, sealing components and discharge connections should be maintained according to established cleaning procedures. When switching between different materials, manufacturers should follow their quality management requirements and conduct cleaning validation where necessary.

It is important to note that a Rotary Vibratory Sieve performs physical particle size separation. It does not directly change the chemical properties of pharmaceutical excipients or replace content testing, purity analysis or other quality inspections. Actual particle breakage also depends on mechanical strength, feeding conditions, screening parameters and equipment configuration. Material trials are recommended to evaluate the results.

5. Gaofu Machinery Rotary Vibratory Sieve for Fragile Pharmaceutical Excipients

Different pharmaceutical excipients require screening equipment that can balance particle classification requirements with material characteristics. Gaofu Machinery's Rotary Vibratory Sieve can be selected and configured according to material brittleness, target particle size, required throughput and production environment.

Screen mesh specifications, number of screening decks, vibration parameters and feeding and discharge structures can all be evaluated to suit specific applications.

With appropriate equipment configuration and operating parameter adjustments, manufacturers can optimize screening operations and help reduce unnecessary mechanical impact, providing a more suitable particle classification solution for fragile or powder-prone pharmaceutical excipients.

Conclusion

Pharmaceutical excipient screening involves more than achieving the required particle size distribution. Particle integrity and material loss also deserve attention.

With adjustable vibration settings, flexible screen mesh configurations and a range of auxiliary equipment options, Gaofu Machinery's Rotary Vibratory Sieve provides screening support for pharmaceutical excipients with different physical properties.

Conducting material trials, selecting appropriate screening parameters and maintaining the equipment properly can help manufacturers meet particle classification requirements while reducing unnecessary breakage and powder loss during screening.

                                                                                                      1    


Pharmaceutical Industry Client Testimonials

Dong-E E-Jiao, Harbin Pharmaceutical Group, North China Pharmaceutical,Yangtze River Pharmaceutical Group, Taiji Group, Huadong Medicine,CSPC Group, Northeast Pharmaceutical, Guangzhou Baiyunshan, Tongrentang,Huiren Pharmaceutical, Fosun Pharma, Xiuzheng Pharmaceutical, Lijun Pharmaceutical,Luye Pharma Group, Di'ao Group, TianGongLi, Hengrui Medicine, Jiuzhitang, Jiangzhong Pharmaceutical, Lunan Pharmaceutical, Yunnan Baiyao, Sunflower Pharmaceutical,China Sanjiu Enterprise Group, Sanjin Pharmaceutical, Yiling Pharmaceutical,Wantong Pharmaceutical, Pientzehuang, Ma Yinglong Pharmaceutical, Guangyuyuan,Aodong Pharmaceutical, Besunyen, Jingfukang Pharmaceutical, Furen Pharmaceutical Group,Guizhou Bailing, Conba, Huasu Pharmaceutical, Yifang Pharmaceutical


Fortune 500 Client Testimonials

CNPC、CSCEC、Sinochem Holdings、CRCC、China Minmetals Corporation、CNOOC、CR、Sinopharm、CHN Energy、COFCO Corporation、Huawei Technologies、PowerChina、CITIC Group、Wuchan Zhongda Group、NORINCO、Chalco、CNBM、 Shaanxi Coal and Chemical Industry Group、Ansteel Group、CETC、CSSC、CASC、CEC、Jinchuan Group、CASIC、Conch Cement、CNNC、SPH、Shanxi Coking Coal Group、 Zhongtai Chemical、GPHL、DEC、Sinosteel Corporation、MCC、China National Salt Industry Chemical、China Baowu Steel Group、China Animal Husbandry Industry Co., Ltd.、CECEP


About Gaofu

Xinxiang Gaofu Machinery Co., Ltd. was founded back in the 1980s. With over 40 years of development, it has been certified as a National-level Specialized, Refined, Unique & Innovative Little Giant Enterprise, National Green Factory, National High-tech Enterprise, and National Intellectual Property Advantage Enterprise, and serves as the President Unit of China Vibration Screening Industry Association.

The company is accredited with the Henan Provincial Industrial Design Center, Henan Provincial Engineering Technology Research Center for Intelligent On-line Screening System, and Xinxiang Municipal Engineering Technology Research Center for Fine Screening.

Gaofu has obtained more than 500 patents including invention patents, utility model patents and design patents, been awarded the Science and Technology Achievement Prize issued by the Ministry of Industry and Information Technology of China, and participated in drafting and formulating 4 national standards.

Gaofu's product portfolio covers multiple series and hundreds of specifications, including vibrating screening equipment, conveying equipment, coal crushing equipment, filtration equipment and automatic material handling systems.

Core products include vibrating screens, screening machines, vibratory sifters, rotary vibrating screens, ultrasonic vibrating screens, linear vibrating screens, airflow screens, gyratory screens, roller screens, dewatering screens, bar screens, vacuum feeding machines, dust-free feeding stations, bulk bag feeding stations, feeding systems, automatic powder feeding systems, automatic slag-discharging filters, leaf filters, clay filters, toothed roll crushers, coal crushers and other machinery.

These products are widely applied in food, pharmaceutical, chemical, metallurgy, construction materials, mining, thermal power, environmental protection and many other industries, winning recognition and trust from over 10,000 clients worldwide.

Gaofu products enjoy strong sales across Greater China, and are exported to more than 100 countries and regions such as Russia, Canada, the United States, New Zealand, Japan, Brazil and South Africa.

Upholding the corporate mission of Improving material quality & efficiency to fully satisfy customer demands, Gaofu maintains long-term partnerships with clients to achieve win-win development.

At present, Gaofu is an official qualified supplier for numerous Fortune Global 500 enterprises, including CNPC, Sinopec, Sinochem Holdings, China Resources Group, Sinopharm Group, COFCO, China National Building Material, China Aerospace Science and Technology Corporation, Jinchuan Group and more.

Gaofu Machinery ranks No.1 in global sales volume of vibrating screens.

In May 2024, Frost & Sullivan, a world-renowned international consulting firm, issued a Market Position Verification Certificate confirming that Gaofu achieved the world's largest shipment volume of vibrating screens in the global market in 2023.

Get exclusive insights & resources straight to your inbox

    whatsapp