Over 10,000+ customers' choice, Focus on screening industry 40+ years
Fragile catalyst granules may pass through several transfer stages during production. Even after forming and shaping, mechanical forces during subsequent handling can affect their original structure.
Manual Handling and Repeated Pouring
When material is poured from bags, drums, or transfer containers into processing equipment, particles may collide with container walls or equipment inlets. Repeated handling and pouring can increase opportunities for mechanical impact.
Impact from Excessive Drop Heights
When material falls directly from a high position into a hopper or processing unit, particles may experience significant impact. This type of discharge arrangement deserves particular attention when handling catalysts with relatively low mechanical strength.
Friction and Impact at Pipeline Bends
During pneumatic conveying, particles travel with the airflow and may come into contact with pipeline walls, bends, and other internal structures. Air velocity, pipeline layout, and particle strength can all influence abrasion and breakage.
Unsuitable Conveying Parameters
Excessive conveying air velocity, unstable feeding, or an unsuitable discharge arrangement may increase the mechanical forces acting on particles. Therefore, gentle conveying depends not only on the equipment type but also on proper system design based on the material's properties.
Gaofu Machinery's Vacuum Conveyor operates on the principle of negative-pressure conveying. A vacuum power unit creates a pressure difference, allowing airflow to draw material into the conveying pipeline and transport it to the designated receiving unit.
Compared with manual handling and open pouring, pipeline conveying can reduce certain intermediate transfer steps and move material along a planned route. For fragile catalyst granules, several aspects of the system can be optimized:
Control conveying airflow: Evaluate suitable air velocity according to particle size, density, and mechanical strength to help avoid unnecessary impact.
Optimize pipeline routing: Plan conveying distances, pipeline bends, and overall layout to reduce unnecessary opportunities for particle collision and friction.
Match the feeding rate: Adjust the feeding method according to the required conveying capacity to help prevent unstable material flow caused by excessive feeding.
Optimize receiving and discharge: Evaluate the receiving equipment structure and material drop height to manage the forces acting on particles as they enter downstream equipment.
It is important to note that vacuum conveying is a form of pneumatic conveying. Particles may still interact with the airflow and pipeline surfaces during operation, so impact and abrasion cannot be completely eliminated. Actual particle breakage rates should be verified through material testing and operational measurements.
Traditional material transfer may involve repeated bag handling, lifting, pouring, and temporary storage. A Vacuum Conveyor connects the feeding point to the target equipment through pipelines, helping reduce some of these intermediate operations.
For catalyst granules transferred between storage hoppers, mixing equipment, screening machines, and other processing units, a properly planned conveying route can reduce unnecessary handling and the additional mechanical forces associated with repeated transfers.
A Vacuum Conveyor uses negative pressure to generate the suction force required for material transfer. Its feeding and conveying arrangements can be configured according to process requirements.
Manufacturers can adjust the feeding process to match their production schedules, helping reduce irregular material discharge and uneven feeding associated with manual pouring.
For fragile particles, a more controlled feeding rate can support the optimization of conveying parameters. Actual results still depend on particle strength and system operating conditions.
The equipment uses pipelines to connect the material supply point with the receiving unit, reducing the need for direct exposure during transfer.
For catalyst granules that are prone to abrasion and fines generation, relatively enclosed conveying can help control dust dispersion, reduce material spillage, and ease routine cleaning requirements.
An enclosed pipeline does not guarantee completely dust-free operation. Actual performance also depends on system sealing, filtration equipment, maintenance, and the site's dust collection arrangements.
A Vacuum Conveyor can be connected to different types of processing equipment according to the production workflow. Typical applications include:
Transferring catalyst powder or granules from storage hoppers to mixing equipment.
Feeding vibratory screens, rotary vibrating screens, and other screening machines.
Conveying classified materials to designated receiving hoppers.
Supplying material to downstream metering and packaging equipment.
With a properly designed conveying route, manufacturers can improve material flow between different production units and support more coordinated operations.
Catalyst granules vary in particle size, bulk density, flowability, mechanical strength, and chemical properties. Gaofu Machinery's Vacuum Conveyor can be evaluated and configured according to specific operating conditions to help manufacturers identify a solution suited to their materials.
For materials that are particularly fragile, prone to abrasion, or subject to special safety requirements, application-specific testing should be conducted before equipment selection rather than relying on standard powder conveying parameters.
Whether a Vacuum Conveyor is suitable for fragile catalyst particles depends on the compatibility between material properties and equipment configuration. During the design stage, manufacturers should provide the following information for evaluation.
Basic Particle Characteristics: Include particle size range, particle shape, bulk density, moisture content, and flowability.
Mechanical Strength: Understand the particles' resistance to compression, impact, and abrasion, as well as the requirements for controlling breakage and fines generation.
Conveying Conditions: Specify conveying distance, vertical lift, target conveying capacity, feeding frequency, and receiving equipment type.
Pre- and Post-Conveying Inspection: Compare particle size distribution, fines content, or particle integrity before and after conveying to evaluate how the system affects material condition.
Special Safety Characteristics: If the catalyst is corrosive, toxic, or capable of generating combustible dust, conduct a professional assessment based on its safety data sheet (SDS). Material compatibility, filtration, sealing, and protective requirements should be clearly defined. A standard Vacuum Conveyor should not be assumed to include explosion protection or inert gas protection.
Material testing and process evaluation can help determine whether a Vacuum Conveyor is suitable for the catalyst application and provide a basis for optimizing airflow velocity, pipeline design, and discharge arrangements.
For fragile catalysts, quality management should extend beyond forming and processing. Subsequent material transfer also deserves attention. Reducing unnecessary manual handling, planning appropriate conveying routes, and matching operating parameters to particle strength are important steps toward improving the conveying process.
Gaofu Machinery's Vacuum Conveyor uses negative-pressure suction and pipeline-based conveying. It can be configured according to catalyst characteristics, conveying distance, required capacity, and production line layout. By reducing certain intermediate transfer steps and optimizing feeding and discharge arrangements, the system provides process support for catalyst particle handling.
It is important to emphasize that a Vacuum Conveyor cannot guarantee zero particle breakage, nor can it independently determine the final particle size distribution or catalytic activity. Actual conveying performance and particle integrity should be verified through material testing, equipment commissioning, and operational inspection.
Gaofu Machinery can provide Vacuum Conveyor configuration recommendations based on material characteristics and production requirements, helping manufacturers optimize catalyst transfer processes and achieve a practical balance between conveying efficiency and particle integrity.

Chemical Industry Client Testimonials
Wanhua Chemical, Yuntianhua Group, Kingfa Science & Technology, Formosa Plastics Group, China Pingmei Shenma Group, Kemai Co., Ltd., Luxi Chemical, Liby Group, Oriental Yuhong, Davco, Chenming Group, Guanhao High-Tech
Kaifei Chemical, Sunsine Chemical, Weilin Co., Ltd., Xuyang Group, 3Trees, Maydos, Loyal Group (Kingpor Group), AkzoNobel, CSSC Hanguang, Haike Group, Nice Group, Taishan Fiberglass, Wanhua, Red Eagle, China XLX Fertiliser (Xinlianxin), CCtech Catalysis, China National Bluestar, Sakura Paint, ITANOS, Yanggu Huatai, Sennics, Longxing Chemical Group, Tunhe Co., Ltd., GHW International, Jianye Chemical, Finehope
Fortune 500 Client Testimonials
CNPC、CSCEC、Sinochem Holdings、CRCC、China Minmetals Corporation、CNOOC、CR、Sinopharm、CHN Energy、COFCO Corporation、Huawei Technologies、PowerChina、CITIC Group、Wuchan Zhongda Group、NORINCO、Chalco、CNBM、 Shaanxi Coal and Chemical Industry Group、Ansteel Group、CETC、CSSC、CASC、CEC、Jinchuan Group、CASIC、Conch Cement、CNNC、SPH、Shanxi Coking Coal Group、 Zhongtai Chemical、GPHL、DEC、Sinosteel Corporation、MCC、China National Salt Industry Chemical、China Baowu Steel Group、China Animal Husbandry Industry Co., Ltd.、CECEP
About Gaofu
Xinxiang Gaofu Machinery Co., Ltd. was founded back in the 1980s. With over 40 years of development, it has been certified as a National-level Specialized, Refined, Unique & Innovative Little Giant Enterprise, National Green Factory, National High-tech Enterprise, and National Intellectual Property Advantage Enterprise, and serves as the President Unit of China Vibration Screening Industry Association.
The company is accredited with the Henan Provincial Industrial Design Center, Henan Provincial Engineering Technology Research Center for Intelligent On-line Screening System, and Xinxiang Municipal Engineering Technology Research Center for Fine Screening.
Gaofu has obtained more than 500 patents including invention patents, utility model patents and design patents, been awarded the Science and Technology Achievement Prize issued by the Ministry of Industry and Information Technology of China, and participated in drafting and formulating 4 national standards.
Gaofu's product portfolio covers multiple series and hundreds of specifications, including vibrating screening equipment, conveying equipment, coal crushing equipment, filtration equipment and automatic material handling systems.
Core products include vibrating screens, screening machines, vibratory sifters, rotary vibrating screens, ultrasonic vibrating screens, linear vibrating screens, airflow screens, gyratory screens, roller screens, dewatering screens, bar screens, vacuum feeding machines, dust-free feeding stations, bulk bag feeding stations, feeding systems, automatic powder feeding systems, automatic slag-discharging filters, leaf filters, clay filters, toothed roll crushers, coal crushers and other machinery.
These products are widely applied in food, pharmaceutical, chemical, metallurgy, construction materials, mining, thermal power, environmental protection and many other industries, winning recognition and trust from over 10,000 clients worldwide.
Gaofu products enjoy strong sales across Greater China, and are exported to more than 100 countries and regions such as Russia, Canada, the United States, New Zealand, Japan, Brazil and South Africa.
Upholding the corporate mission of Improving material quality & efficiency to fully satisfy customer demands, Gaofu maintains long-term partnerships with clients to achieve win-win development.
At present, Gaofu is an official qualified supplier for numerous Fortune Global 500 enterprises, including CNPC, Sinopec, Sinochem Holdings, China Resources Group, Sinopharm Group, COFCO, China National Building Material, China Aerospace Science and Technology Corporation, Jinchuan Group and more.
Gaofu Machinery ranks No.1 in global sales volume of vibrating screens.
In May 2024, Frost & Sullivan, a world-renowned international consulting firm, issued a Market Position Verification Certificate confirming that Gaofu achieved the world's largest shipment volume of vibrating screens in the global market in 2023.