Over 10,000+ customers' choice, Focus on screening industry 40+ years

Ultrasonic Vibrating Sieve for Ultrafine Catalyst Powder: Helping Reduce Screen Blinding in High-Mesh Screening

Ultrasonic Vibrating Sieve for Ultrafine Catalyst Powder: Helping Reduce Screen Blinding in High-Mesh Screening

1. Why Ultrafine Catalyst Powder Can Be Difficult to Screen

Fine catalyst powders may exhibit different flow and screening characteristics depending on their chemical composition, particle size, moisture content, and surface properties.

During high-mesh screening, several factors may contribute to screen blinding:

  • Electrostatic adhesion: Fine particles may accumulate on the screen surface due to electrostatic attraction.

  • Particle agglomeration: Moisture and interparticle forces can cause small particles to form clusters, affecting their passage through the screen apertures.

  • Fine screen apertures: Smaller openings provide more precise size classification but can be more susceptible to blockage.

  • Material accumulation: An unsuitable feed rate or uneven material distribution may cause powder to build up on the screen surface.

These conditions can reduce screening continuity and increase the need for manual screen cleaning. Selecting an appropriate screening method is therefore an important part of fine catalyst powder processing.

2. How Ultrasonic Technology Supports Fine-Mesh Screening

The Gaofu S49-AC Ultrasonic Vibrating Sieve combines three-dimensional rotary vibration with an ultrasonic screen cleaning system.

During operation, the vibration motor generates multi-directional movement through its eccentric weights, helping spread material across the screen surface. At the same time, the ultrasonic system applies high-frequency vibrations to the mesh, helping reduce fine-particle adhesion and screen blinding.

The system operates at a frequency of 36 kHz. Its auxiliary cleaning action can be useful when processing ultrafine powders or materials that tend to accumulate on fine screen mesh.

It is important to note that ultrasonic cleaning does not guarantee that screen blinding will never occur. Actual performance depends on the material's properties, screen specifications, feed rate, and operating conditions. Material testing is recommended before selecting the final configuration.

3. Key Features for Catalyst Powder Processing

Support for High-Mesh Screening

When catalyst powders require fine particle size classification, screen aperture selection plays an important role. The ultrasonic system helps maintain screen openings during operation, supporting the processing of fine powders under suitable conditions.

The appropriate mesh specification should be selected according to the target particle size distribution, material characteristics, and required screening accuracy.

Multilayer Classification

The equipment can be configured with multiple screen layers to separate material into different particle size fractions. This arrangement may help simplify grading operations and provide more structured material classification for subsequent processing.

The number of layers and screen specifications should be determined according to the actual production process.

Adjustable Material Movement

Three-dimensional vibration helps move and distribute material across the screen surface. By adjusting the phase angle of the upper and lower eccentric weights, operators can change the material's movement trajectory to suit different screening requirements.

This adjustment helps accommodate variations in material flow characteristics and screening conditions.

Multiple Equipment Sizes

The S49-AC series offers different equipment sizes to accommodate varying production layouts and processing requirements. Selection should take into account the required screening area, feed characteristics, target capacity, and available installation space.

A suitable configuration should be confirmed through communication with the manufacturer and, where necessary, material testing.

Convenient Screen Inspection and Maintenance

Screen condition has a direct influence on screening performance. Regular inspection of the mesh, screen frame, seals, and material-contact components helps identify wear, damage, or material buildup.

A practical maintenance plan can also support cleaning between production batches and help manage the risk of material carryover when switching between catalyst products.

4. Factors to Consider When Selecting an Ultrasonic Vibrating Sieve

Before choosing an Industrial Sieving Machine for catalyst powder, manufacturers should evaluate more than the target mesh size.

Key considerations include:

  • Particle size distribution: Understand the proportion of fine particles and the required classification range.

  • Agglomeration tendency: Assess whether the powder is affected by moisture, static electricity, or interparticle attraction.

  • Material throughput: Match the equipment's screening area and configuration to the expected feed rate.

  • Particle strength: Consider whether the catalyst is prone to attrition or breakage during vibration.

  • Chemical and safety properties: Review the material's safety data sheet (SDS) to identify potential toxicity, corrosivity, oxygen sensitivity, or combustible dust hazards.

If the catalyst has special environmental or safety requirements, the equipment configuration should be professionally assessed. Standard enclosed screening equipment should not be assumed to provide explosion protection, inert-gas protection, or special corrosion resistance unless these features are specifically designed and confirmed.

5. Integrating Screening into the Catalyst Production Process

A well-planned screening process involves more than selecting a suitable vibrating sieve machine. Material preparation, feeding, screening, collection, and quality inspection should work together.

A typical workflow may include:

  1. Material preparation: Check the catalyst powder's condition and remove unsuitable large agglomerates where required by the process.

  2. Controlled feeding: Maintain a suitable and consistent feed rate to avoid excessive material accumulation on the screen.

  3. Ultrasonic screening: Use the combined vibratory and ultrasonic system to support particle size classification.

  4. Fraction collection: Collect the screened material and separated oversize particles according to the production requirements.

  5. Quality inspection: Check particle size distribution and other relevant quality indicators using the appropriate testing methods.

This approach helps integrate screening into the wider catalyst production process. The vibrating screen performs physical separation according to screen aperture size; it does not activate catalysts, chemically purify materials, or determine catalytic activity.

Conclusion

For ultrafine catalyst powder that is difficult to process through conventional fine-mesh screening, an Ultrasonic Vibrating Sieve offers an additional screen-cleaning function alongside three-dimensional vibratory motion. It can help reduce particle accumulation on the mesh and support more continuous particle size classification under suitable operating conditions.

Gaofu Machinery provides screening equipment options for different powder characteristics and production requirements. By considering particle properties, target mesh size, processing capacity, and safety requirements, manufacturers can select a suitable vibratory screen configuration for their catalyst processing operations.

                                                                             2


Chemical Industry Client Testimonials

Wanhua Chemical, Yuntianhua Group, Kingfa Science & Technology, Formosa Plastics Group, China Pingmei Shenma Group, Kemai Co., Ltd., Luxi Chemical, Liby Group, Oriental Yuhong, Davco, Chenming Group, Guanhao High-Tech

Kaifei Chemical, Sunsine Chemical, Weilin Co., Ltd., Xuyang Group, 3Trees, Maydos, Loyal Group (Kingpor Group), AkzoNobel, CSSC Hanguang, Haike Group, Nice Group, Taishan Fiberglass, Wanhua, Red Eagle, China XLX Fertiliser (Xinlianxin), CCtech Catalysis, China National Bluestar, Sakura Paint, ITANOS, Yanggu Huatai, Sennics, Longxing Chemical Group, Tunhe Co., Ltd., GHW International, Jianye Chemical, Finehope


Fortune 500 Client Testimonials

CNPC、CSCEC、Sinochem Holdings、CRCC、China Minmetals Corporation、CNOOC、CR、Sinopharm、CHN Energy、COFCO Corporation、Huawei Technologies、PowerChina、CITIC Group、Wuchan Zhongda Group、NORINCO、Chalco、CNBM、 Shaanxi Coal and Chemical Industry Group、Ansteel Group、CETC、CSSC、CASC、CEC、Jinchuan Group、CASIC、Conch Cement、CNNC、SPH、Shanxi Coking Coal Group、 Zhongtai Chemical、GPHL、DEC、Sinosteel Corporation、MCC、China National Salt Industry Chemical、China Baowu Steel Group、China Animal Husbandry Industry Co., Ltd.、CECEP


About Gaofu

Xinxiang Gaofu Machinery Co., Ltd. was founded back in the 1980s. With over 40 years of development, it has been certified as a National-level Specialized, Refined, Unique & Innovative Little Giant Enterprise, National Green Factory, National High-tech Enterprise, and National Intellectual Property Advantage Enterprise, and serves as the President Unit of China Vibration Screening Industry Association.

The company is accredited with the Henan Provincial Industrial Design Center, Henan Provincial Engineering Technology Research Center for Intelligent On-line Screening System, and Xinxiang Municipal Engineering Technology Research Center for Fine Screening.

Gaofu has obtained more than 500 patents including invention patents, utility model patents and design patents, been awarded the Science and Technology Achievement Prize issued by the Ministry of Industry and Information Technology of China, and participated in drafting and formulating 4 national standards.

Gaofu's product portfolio covers multiple series and hundreds of specifications, including vibrating screening equipment, conveying equipment, coal crushing equipment, filtration equipment and automatic material handling systems.

Core products include vibrating screens, screening machines, vibratory sifters, rotary vibrating screens, ultrasonic vibrating screens, linear vibrating screens, airflow screens, gyratory screens, roller screens, dewatering screens, bar screens, vacuum feeding machines, dust-free feeding stations, bulk bag feeding stations, feeding systems, automatic powder feeding systems, automatic slag-discharging filters, leaf filters, clay filters, toothed roll crushers, coal crushers and other machinery.

These products are widely applied in food, pharmaceutical, chemical, metallurgy, construction materials, mining, thermal power, environmental protection and many other industries, winning recognition and trust from over 10,000 clients worldwide.

Gaofu products enjoy strong sales across Greater China, and are exported to more than 100 countries and regions such as Russia, Canada, the United States, New Zealand, Japan, Brazil and South Africa.

Upholding the corporate mission of Improving material quality & efficiency to fully satisfy customer demands, Gaofu maintains long-term partnerships with clients to achieve win-win development.

At present, Gaofu is an official qualified supplier for numerous Fortune Global 500 enterprises, including CNPC, Sinopec, Sinochem Holdings, China Resources Group, Sinopharm Group, COFCO, China National Building Material, China Aerospace Science and Technology Corporation, Jinchuan Group and more.

Gaofu Machinery ranks No.1 in global sales volume of vibrating screens.

In May 2024, Frost & Sullivan, a world-renowned international consulting firm, issued a Market Position Verification Certificate confirming that Gaofu achieved the world's largest shipment volume of vibrating screens in the global market in 2023.

Get exclusive insights & resources straight to your inbox

    whatsapp