Over 10,000+ customers' choice, Focus on screening industry 40+ years

Ultrasonic Vibrating Sieve for Catalyst Processing: Supporting Fine Screening in the Specialty Chemicals Industry

Ultrasonic Vibrating Sieve for Catalyst Processing: Supporting Fine Screening in the Specialty Chemicals Industry

1. Fine Screening Challenges Go Beyond Screen Aperture Size

The screening performance of catalyst powder depends not only on mesh specifications but also on the physical properties of the material. Several common challenges may arise during production:

Fine Powder Agglomeration

Some catalyst powders contain very fine particles that may agglomerate due to moisture, static electricity, or interparticle forces. These agglomerates may not disperse easily, so their screening behavior can differ from that of individual particles.

Screen Blinding with Fine Meshes

When fine mesh screens with small apertures are used, particles may become trapped in or around the openings. Continued accumulation can reduce the effective screening area and affect screening performance and operating conditions.

Maintaining Particle Integrity

Some catalyst particles are relatively fragile and may wear down or break under excessive mechanical impact. Screening solutions should therefore consider both the target particle size and the mechanical strength of the material.

These challenges cannot always be addressed simply by increasing vibration intensity. For fine powders that are difficult to separate or prone to screen blinding, the screen-cleaning method and material dispersion conditions also need to be considered.

2. Ultrasonic Screen Cleaning Supports Fine Powder Screening

Gaofu Machinery's Ultrasonic Vibrating Sieve combines conventional vibratory screening with an ultrasonic screen-cleaning system. During operation, the vibration motor drives the screen body, allowing material to move across the mesh surface. At the same time, the ultrasonic system applies high-frequency vibration to the screen mesh, helping reduce the accumulation of fine particles around the apertures.

The two vibration systems work together to support the screening process in several ways:

  • Helps keep screen apertures clear: High-frequency vibration acts on the mesh and helps reduce the accumulation of fine particles around screen openings.

  • Supports fine particle passage: For suitable powder materials, ultrasonic cleaning can help particles pass through fine mesh screens more consistently.

  • May reduce manual screen cleaning: In some applications involving screen blinding, ultrasonic cleaning can reduce the need for frequent shutdowns for manual cleaning. Actual results depend on material properties and equipment configuration.

  • Supports fine particle classification: By matching screen specifications with suitable ultrasonic parameters, the machine can be used for screening and classifying fine catalyst powders.

It is important to note that ultrasonic technology provides auxiliary screen cleaning. It cannot guarantee that screen blinding will never occur. Performance should be evaluated through material testing, taking particle size, moisture content, agglomeration, screen specifications, and operating parameters into account.

3. Key Equipment Advantages for Fine Chemical Processing

For specialty chemical manufacturers, screening equipment needs to do more than separate particles. Operating convenience, process compatibility, and maintenance requirements are also important.

1. Suitable for Fine Mesh Screening Applications

The ultrasonic screen-cleaning system helps improve screen conditions when fine apertures are used. It can be considered for certain fine powder applications that are challenging for conventional vibratory screening machines. The appropriate mesh specification must be determined according to catalyst particle size and screening objectives rather than selected independently of the material.

2. Helps Reduce Operating Disruptions Caused by Screen Blinding

When material tends to accumulate around screen openings, ultrasonic cleaning can help reduce screen blinding and maintain the effective screening area. This may reduce some interruptions caused by manual screen cleaning, although routine inspection and maintenance remain necessary.

3. Configurable for Different Material Characteristics

Catalysts vary in particle shape, flowability, brittleness, and chemical properties. Equipment configuration can be evaluated according to the specific screening requirements, including screen mesh, number of screening layers, product-contact materials, and related structural details.

4. Supports Particle Size Distribution Management

By selecting suitable screen apertures and operating parameters, the machine can separate catalyst powders into different particle size ranges. This supports fines management, particle classification, and subsequent production processes. The final particle size distribution should still be confirmed through sampling and testing.

4. Equipment Selection: Look Beyond Mesh Count

Ultrasonic vibrating sieves are suitable for certain fine powder applications involving agglomeration or screen blinding. However, not every catalyst requires an ultrasonic system. Before selecting equipment, manufacturers should evaluate several factors:

  • Target particle size: Define the required separation range and determine the corresponding screen aperture according to the applicable mesh standard.

  • Material condition: Assess catalyst moisture content, flowability, particle shape, and tendency to agglomerate.

  • Particle strength: For fragile catalysts, evaluate vibration parameters and material movement to help manage the risk of attrition and breakage.

  • Required throughput: Consider the production line feed rate, effective screening area, and downstream material handling capacity.

  • Material and safety requirements: Evaluate product-contact materials and equipment safety features according to the catalyst's chemical composition, corrosivity, and dust hazards.

Gaofu Machinery can assess the material samples, target particle size, and operating conditions to help determine a suitable ultrasonic vibrating sieve configuration.

For catalysts involving combustible dust, toxicity, or corrosive hazards, a professional risk assessment should be conducted based on the Safety Data Sheet (SDS). An ordinary Ultrasonic Vibrating Sieve should not be assumed to provide explosion protection, inert-gas protection, or specialized corrosion resistance. Such requirements must be evaluated and confirmed separately.

5. Screening Performance and Catalyst Quality Require Equipment and Testing

Particle size distribution is one aspect of catalyst quality management, but it is not the only factor determining catalyst performance. An Ultrasonic Vibrating Sieve performs physical separation according to screen aperture size. It does not directly change the catalyst's chemical composition, active component content, or catalytic activity.

For this reason, screening should be integrated with the manufacturer's quality control procedures. Depending on process requirements, samples of oversize material, undersize material, and the target particle fraction can be collected and analyzed to check whether the particle size distribution meets the specified range.

Cleaning management, batch records, and equipment maintenance should also be incorporated into routine production practices to help control material residue and process variations.

For production lines that regularly screen fine powders, periodic inspection of screen tension, ultrasonic system connections, and screen surface conditions can help identify equipment issues and support consistent operation.

Conclusion

Fine catalyst screening in specialty chemical production involves several considerations, including particle passage, screen cleanliness, and particle size classification. For materials that tend to agglomerate or cause screen blinding, ultrasonic screen-cleaning technology can serve as an auxiliary method alongside conventional vibratory screening.

Gaofu Machinery's Ultrasonic Vibrating Sieve can be evaluated and configured according to catalyst properties, target mesh specifications, and production requirements. By matching the screen mesh, ultrasonic cleaning system, and equipment structure to the application, manufacturers can establish a screening solution suited to their fine chemical processing needs.

                                                                             8


Chemical Industry Client Testimonials

Wanhua Chemical, Yuntianhua Group, Kingfa Science & Technology, Formosa Plastics Group, China Pingmei Shenma Group, Kemai Co., Ltd., Luxi Chemical, Liby Group, Oriental Yuhong, Davco, Chenming Group, Guanhao High-Tech

Kaifei Chemical, Sunsine Chemical, Weilin Co., Ltd., Xuyang Group, 3Trees, Maydos, Loyal Group (Kingpor Group), AkzoNobel, CSSC Hanguang, Haike Group, Nice Group, Taishan Fiberglass, Wanhua, Red Eagle, China XLX Fertiliser (Xinlianxin), CCtech Catalysis, China National Bluestar, Sakura Paint, ITANOS, Yanggu Huatai, Sennics, Longxing Chemical Group, Tunhe Co., Ltd., GHW International, Jianye Chemical, Finehope


Fortune 500 Client Testimonials

CNPC、CSCEC、Sinochem Holdings、CRCC、China Minmetals Corporation、CNOOC、CR、Sinopharm、CHN Energy、COFCO Corporation、Huawei Technologies、PowerChina、CITIC Group、Wuchan Zhongda Group、NORINCO、Chalco、CNBM、 Shaanxi Coal and Chemical Industry Group、Ansteel Group、CETC、CSSC、CASC、CEC、Jinchuan Group、CASIC、Conch Cement、CNNC、SPH、Shanxi Coking Coal Group、 Zhongtai Chemical、GPHL、DEC、Sinosteel Corporation、MCC、China National Salt Industry Chemical、China Baowu Steel Group、China Animal Husbandry Industry Co., Ltd.、CECEP


About Gaofu

Xinxiang Gaofu Machinery Co., Ltd. was founded back in the 1980s. With over 40 years of development, it has been certified as a National-level Specialized, Refined, Unique & Innovative Little Giant Enterprise, National Green Factory, National High-tech Enterprise, and National Intellectual Property Advantage Enterprise, and serves as the President Unit of China Vibration Screening Industry Association.

The company is accredited with the Henan Provincial Industrial Design Center, Henan Provincial Engineering Technology Research Center for Intelligent On-line Screening System, and Xinxiang Municipal Engineering Technology Research Center for Fine Screening.

Gaofu has obtained more than 500 patents including invention patents, utility model patents and design patents, been awarded the Science and Technology Achievement Prize issued by the Ministry of Industry and Information Technology of China, and participated in drafting and formulating 4 national standards.

Gaofu's product portfolio covers multiple series and hundreds of specifications, including vibrating screening equipment, conveying equipment, coal crushing equipment, filtration equipment and automatic material handling systems.

Core products include vibrating screens, screening machines, vibratory sifters, rotary vibrating screens, ultrasonic vibrating screens, linear vibrating screens, airflow screens, gyratory screens, roller screens, dewatering screens, bar screens, vacuum feeding machines, dust-free feeding stations, bulk bag feeding stations, feeding systems, automatic powder feeding systems, automatic slag-discharging filters, leaf filters, clay filters, toothed roll crushers, coal crushers and other machinery.

These products are widely applied in food, pharmaceutical, chemical, metallurgy, construction materials, mining, thermal power, environmental protection and many other industries, winning recognition and trust from over 10,000 clients worldwide.

Gaofu products enjoy strong sales across Greater China, and are exported to more than 100 countries and regions such as Russia, Canada, the United States, New Zealand, Japan, Brazil and South Africa.

Upholding the corporate mission of Improving material quality & efficiency to fully satisfy customer demands, Gaofu maintains long-term partnerships with clients to achieve win-win development.

At present, Gaofu is an official qualified supplier for numerous Fortune Global 500 enterprises, including CNPC, Sinopec, Sinochem Holdings, China Resources Group, Sinopharm Group, COFCO, China National Building Material, China Aerospace Science and Technology Corporation, Jinchuan Group and more.

Gaofu Machinery ranks No.1 in global sales volume of vibrating screens.

In May 2024, Frost & Sullivan, a world-renowned international consulting firm, issued a Market Position Verification Certificate confirming that Gaofu achieved the world's largest shipment volume of vibrating screens in the global market in 2023.

Get exclusive insights & resources straight to your inbox

    whatsapp