Over 10,000+ customers' choice, Focus on screening industry 40+ years
Particle breakage during catalyst screening is rarely caused by a single factor. It is generally associated with the mechanical properties of the material and the forces applied throughout the production process.
Vibration and particle impact
A rotary vibratory sieve uses a vibration motor to generate excitation force, causing material to move across the screen surface. If the vibration settings are not properly matched to the material, particles may experience excessive impact, friction, or repeated mechanical contact, increasing the risk of breakage.
Uneven feeding and material accumulation
When the feed rate is too high or the feeding position is unsuitable, material may accumulate in certain areas of the screen. This can increase particle-to-particle contact and compression, affecting screening uniformity and potentially contributing to abrasion.
Unsuitable screen contact conditions
Screen mesh specifications, screen tension, and screen frame design all influence material movement. An unsuitable screen configuration may increase particle residence time or create unnecessary friction during screening.
For brittle catalyst materials, equipment selection should therefore consider more than mesh size and processing capacity. Particle strength, feeding conditions, and operating parameters also need to be evaluated.
For fragile catalyst particles, the goal is not simply to increase excitation force. Instead, the equipment should be configured to provide suitable operating conditions based on the material and screening requirements.
A rotary vibratory sieve uses a vibration motor to generate excitation force, producing three-dimensional movement of the screen body. This motion helps spread, stratify, and separate material across the screen surface.
Excitation force, vibration amplitude, and frequency can influence material movement, screening speed, and particle contact. For brittle materials, these parameters should be selected according to particle strength, size range, and separation requirements rather than simply maximizing vibration intensity.
During equipment configuration, important factors include motor power, excitation force adjustment range, vibration parameters, and operating stability. The specific values should be confirmed against the selected model's technical specifications and optimized through material testing.
The screen mesh determines the particle size separation boundary. Aperture size should be selected according to the target particle size range, while the effective screening area influences material distribution and the conditions for particles to pass through the screen.
Depending on the production requirements, single-layer or multi-layer screen configurations can be selected to separate different particle size fractions.
Screen tension, installation condition, and surface flatness should also be inspected regularly to help prevent abnormal vibration and unnecessary friction.
Consistent feeding helps reduce localized accumulation on the screen surface. For brittle catalyst particles, the feed rate should be matched to the effective screening area and material flow characteristics to avoid introducing excessive material into the screening chamber at one time.
Where necessary, feeding buffers, material guides, or adjustments to upstream conveying equipment can help distribute the material more evenly before it reaches the screening area.
When configuring screening equipment for catalyst powder, Gaofu Machinery considers the material characteristics and production objectives together rather than relying on a single technical parameter.
Key configuration factors include:
Screen diameter and effective area: Selected according to the target throughput, material accumulation characteristics, and available installation space to provide suitable conditions for material distribution and screening.
Vibration motor configuration: Evaluated according to particle strength, screening precision, and operating requirements, including motor power, excitation force, and vibration parameters.
Screen layers and aperture sizes: Selected according to the target particle size range and number of required fractions, while considering material movement across the screen.
Material-contact components: Screen mesh, screen frames, and other product-contact parts should be evaluated according to the catalyst's corrosiveness, abrasiveness, and other chemical properties.
Feeding and discharge arrangements: Inlet and outlet structures should be coordinated with upstream and downstream equipment to help reduce unnecessary impact during material transfer.
Sealing and cleaning design: Sealing arrangements, screen removal, and cleaning access should be assessed according to powder characteristics and site requirements.
These parameters are interconnected. For example, changing the screen aperture may affect material movement and passage through the screen. Adjusting the feed rate can also change the operating conditions and screening results.
For this reason, equipment configuration should be evaluated as part of the complete screening process rather than as a collection of independent specifications.
For catalyst manufacturers, the suitability of screening equipment should be verified using the actual material whenever possible. Gaofu Machinery recommends evaluating several factors during the selection process.
First, identify the catalyst's particle shape, size range, bulk density, and resistance to breakage. These properties help determine how sensitive the material may be to impact and friction.
Next, define the screening objective. Is the process intended to remove oversized particles, separate fines, or classify the material into multiple size fractions? Different objectives require different screen configurations and operating conditions.
The required throughput, operating duration, feeding and discharge methods, and installation conditions should also be confirmed to ensure that the equipment configuration matches the production line.
Where practical, screening tests using actual catalyst samples can provide valuable reference data. Particle size distribution, fines content, and particle integrity can be compared before and after screening. The results can then be used to optimize screen specifications, feed rate, and vibration parameters.
This approach provides a more reliable basis for equipment selection than relying on theoretical specifications alone.
Screening brittle catalyst materials requires attention to both particle size separation and the potential for particle breakage, fines generation, and downstream material handling challenges.
Gaofu Machinery evaluates rotary vibratory sieve configurations based on screen body design, vibration systems, screen mesh arrangements, and feeding and discharge structures. Recommendations are developed with consideration for the physical properties of different catalyst materials and the actual operating conditions.
For materials with low particle strength, fine screening requirements, or strict controls on fines content, it is advisable to provide material samples and relevant process information before selecting the equipment. This allows the screening parameters and proposed configuration to be evaluated more effectively.
Choose a screening configuration that matches your material characteristics and production requirements. Gaofu Machinery can help assess catalyst properties, target particle sizes, and production line conditions to develop a suitable rotary vibratory sieve solution.

Chemical Industry Client Testimonials
Wanhua Chemical, Yuntianhua Group, Kingfa Science & Technology, Formosa Plastics Group, China Pingmei Shenma Group, Kemai Co., Ltd., Luxi Chemical, Liby Group, Oriental Yuhong, Davco, Chenming Group, Guanhao High-Tech
Kaifei Chemical, Sunsine Chemical, Weilin Co., Ltd., Xuyang Group, 3Trees, Maydos, Loyal Group (Kingpor Group), AkzoNobel, CSSC Hanguang, Haike Group, Nice Group, Taishan Fiberglass, Wanhua, Red Eagle, China XLX Fertiliser (Xinlianxin), CCtech Catalysis, China National Bluestar, Sakura Paint, ITANOS, Yanggu Huatai, Sennics, Longxing Chemical Group, Tunhe Co., Ltd., GHW International, Jianye Chemical, Finehope
Fortune 500 Client Testimonials
CNPC、CSCEC、Sinochem Holdings、CRCC、China Minmetals Corporation、CNOOC、CR、Sinopharm、CHN Energy、COFCO Corporation、Huawei Technologies、PowerChina、CITIC Group、Wuchan Zhongda Group、NORINCO、Chalco、CNBM、 Shaanxi Coal and Chemical Industry Group、Ansteel Group、CETC、CSSC、CASC、CEC、Jinchuan Group、CASIC、Conch Cement、CNNC、SPH、Shanxi Coking Coal Group、 Zhongtai Chemical、GPHL、DEC、Sinosteel Corporation、MCC、China National Salt Industry Chemical、China Baowu Steel Group、China Animal Husbandry Industry Co., Ltd.、CECEP
About Gaofu
Xinxiang Gaofu Machinery Co., Ltd. was founded back in the 1980s. With over 40 years of development, it has been certified as a National-level Specialized, Refined, Unique & Innovative Little Giant Enterprise, National Green Factory, National High-tech Enterprise, and National Intellectual Property Advantage Enterprise, and serves as the President Unit of China Vibration Screening Industry Association.
The company is accredited with the Henan Provincial Industrial Design Center, Henan Provincial Engineering Technology Research Center for Intelligent On-line Screening System, and Xinxiang Municipal Engineering Technology Research Center for Fine Screening.
Gaofu has obtained more than 500 patents including invention patents, utility model patents and design patents, been awarded the Science and Technology Achievement Prize issued by the Ministry of Industry and Information Technology of China, and participated in drafting and formulating 4 national standards.
Gaofu's product portfolio covers multiple series and hundreds of specifications, including vibrating screening equipment, conveying equipment, coal crushing equipment, filtration equipment and automatic material handling systems.
Core products include vibrating screens, screening machines, vibratory sifters, rotary vibrating screens, ultrasonic vibrating screens, linear vibrating screens, airflow screens, gyratory screens, roller screens, dewatering screens, bar screens, vacuum feeding machines, dust-free feeding stations, bulk bag feeding stations, feeding systems, automatic powder feeding systems, automatic slag-discharging filters, leaf filters, clay filters, toothed roll crushers, coal crushers and other machinery.
These products are widely applied in food, pharmaceutical, chemical, metallurgy, construction materials, mining, thermal power, environmental protection and many other industries, winning recognition and trust from over 10,000 clients worldwide.
Gaofu products enjoy strong sales across Greater China, and are exported to more than 100 countries and regions such as Russia, Canada, the United States, New Zealand, Japan, Brazil and South Africa.
Upholding the corporate mission of Improving material quality & efficiency to fully satisfy customer demands, Gaofu maintains long-term partnerships with clients to achieve win-win development.
At present, Gaofu is an official qualified supplier for numerous Fortune Global 500 enterprises, including CNPC, Sinopec, Sinochem Holdings, China Resources Group, Sinopharm Group, COFCO, China National Building Material, China Aerospace Science and Technology Corporation, Jinchuan Group and more.
Gaofu Machinery ranks No.1 in global sales volume of vibrating screens.
In May 2024, Frost & Sullivan, a world-renowned international consulting firm, issued a Market Position Verification Certificate confirming that Gaofu achieved the world's largest shipment volume of vibrating screens in the global market in 2023.